Magical Me

Improvement of efficiency of the Ammann device to compensate for its shrinkage in size.

The interior or exterior of the copper tubes and copper spheres of the Ammann device may be coated with multiple layers of alternating dielectric and metallic film in order to create an Orgone blanket to help boost the activity of the negative resistance of the neon gas or the helium gas or atmospheric gases any one of which has been snap charged with adequate breakdown voltage to become an ionized Plasma. This Orgone blanket style of structuring will provide parallel capacitance to the glass vessels which are intended to substitute for the copper tubes and copper spheres in the Ammann device which has been shrunk down in the Pearce-Arrow Tesla device-version of the same circuit.
 
These so-called radio vacuum tubes were not radio vacuum tubes but were erroneously labeled as such by Peter Savo who may have been merely repeating what Tesla told him in order to lead Peter astray so that Peter would falsely conclude how the circuit operated. Yes, Peter was not his nephew but he may have been a snitch planted to steal ideas from Tesla but also be his so-called assistant.
 
These gases may also be pressurized to also help improve efficiency to contribute to the Orgone blanket method of improving efficiency as well? This pressurization would give Tesla an excuse or a reason for having Peter participate in the demonstration to keep Peter’s eye on the pressure gauge on the dashboard.

More ideas about the Ammann device, Eureka!

http://www.energeticforum.com/forum/energetic-forum-discussion/renewable-energy/6485-c-earl-amman-cosmic-electric-generator-query/page3

CVT transmission, part four

Thank you, thank you, thank you, for your criticisms — they are delightful and sometimes helpful!

http://www.energeticforum.com/forum/energetic-forum-discussion/renewable-energy/6485-c-earl-amman-cosmic-electric-generator-query

The evolution of technology is predicated upon the evolution of collective consciousness.

https://www.electricity-magnetism.org/what-is-the-difference-between-real-power-reactive-power-and-apparent-power/

A few thoughts…

How to safely shut off the Ammann circuit once it is on full blast.

A kickstart is needed to get the Ammann device started.

I forgot to mention that it may be necessary to raise the amplitude of the snap charge of voltage delivered to the Leyden jar (or, capacitor) to be the minimum amount necessary to get the noble gases within the tubes and spheres to become a plasma and ignite, such as: 60 to 90 volts for neon gas. Previously, I was only considering the tubes and spheres as filled with air and so I just assumed that a small charge delivered to the Leyden jar was all that was necessary to get things going. But if they are filled with a noble gas instead of air, then this is an indication that ionization short of arcing may not be enough to run the device. It may be necessary for the noble gases inside of the tubes and spheres to be in a state of plasma and arcing throughout their interior?
An air-based spark gap has a voltage breakdown of around 1kV so the gap or space between the spheres will still continue to be a non-plasma and in a state of a pre-arcing ionization even though the interior of the tubes and spheres are a plasma and are busy arcing across the helium or neon noble gases which have a voltage breakdown of approximately 10 to 20 times less than the atmosphere (45V for helium).
This more recent development of conceptualization is significant because it creates two types of spark gaps within the circuit. One type is arcing and the other is not. And the type that is arcing is giving us negative resistance from inside of the tubes and spheres while the other type is not arcing and not in a state of a plasma but is merely ionizing in a state of pre-arcing in the space between the spheres.
This space between the spheres, in some respects, is the most significant of both types of spark gap activity due to its ability to boost the generation or amplification of reactive power within circuit components outside of itself without being powerful itself.

Magnetic coupling of semi-transistors.

The left side of the circuit versus the right side.